Descripción
The GA9060R grinder is the ideal tool for making all types of cuts in a wide variety of materials. The fact that you can change the type of cutting disc allows this power tool to withstand the hardness of cutting any type of material.
CHARACTERISTICS
- Reinforced armature the bonding strength between the coil threads and the collector threads have been significantly improved, a cotton cord and another felt ring have been added. Depth of manifold fins increased from 1.2 mm to 1.9 mm
- New design of the brush holder, with a cover replacing the threaded cap with a cover with a screw, more safety against impacts and heating
- Change of the brush spring, maintains the same pressure at both the beginning and the end of the brush, increases the length of the brush, from 9.5mm to 13.5mm
- More rigid motor casing with material (polyamide 610), to reduce the absorption of moisture in the air, avoiding the expansion of the casing, which can cause movement of the stator, causing friction between the armature and the stator, this can cause some small scratches on the armature wires and communicate them by producing a short circuit
- New, more comfortable side handle, larger outside part, prevents the worker's hand from sliding out
- Anti-restart system prevents accidental starts. A red LED light illuminates indicating that the SAR system is activated
SPECIFICATIONS
- Power: 2,200 W
- Rpm: 6,600 Rpm
- Disc diameter (max.) 230 mm
- M14 insert
- Weight: 5.6 Kg
- Cable length: 2.5m
- Dimensions: LxWxH 450 x 250 x 144 mm
- Soft start
- Anti-restart system
INCLUDES