Descripción
It prevents the appearance of verdigris and resists UV rays, maintaining its performance over time.
It does not create a film and does not alter the appearance of the material.
Protects and simplifies cleaning
Also ideal for joints, craquelé ceramics, marble-resin terrazzo and artificial stone.
Anti-graffiti properties: protects the surface and facilitates the removal of spray graffiti (acrylic, alkyd, nitrosynthetic).
Hydro and oleorepellent: prevents the penetration of aqueous and oily substances.
ADVANTAGES
- Product with very low VOC emissions: GEV certified and EC1PLUS marked.
- Contributes to the acquisition of LEED credits.
- Without hydrocarbon solvents: ecological water-based treatment
- Being water-based, it supports situations of residual humidity and speeds up treatment: it can be applied 24-48 hours after initial cleaning.
- Application in a single coat: apply and work the product until it is completely dry.
- Does not create film and does not yellow
- Ideal for protecting tables, kitchen and bathroom countertops
- The surface is walkable after just 2 hours
- The treated surfaces are suitable for contact with food
IDEAL FOR
- Polished Technical Porcelain Stoneware
- Marble and granite
- Natural Stone and Terrazzo
- Cement And Derivatives
HOW TO USE
Does not dilute: ready to use.
Application: shake before use.
On materials with a matte finish (natural stone, clay, terrazzo, hydraulic mosaic): With a clean and dry surface, apply MP90 ECO XTREME with a brush or fleece evenly, including the joints. Before drying, remove any excess product by tamping it with a clean cloth. On materials with high absorption, apply two coats at a distance of about 20 minutes. On polished porcelain stoneware, polished natural stone and terrazzo: With a clean and dry surface, apply MP90 ECO XTREME, completely impregnating the material and the joints with a brush or fleece. Before the product dries (approx. 10-15 min.), massage with a microfiber cloth moistened with the same product to promote penetration. Then dry with a clean cloth. The use of rotating machines is possible to speed up the process. To complete the cycle with the finish.
ATTENTION ! Previously test the product on a small part of the surface to check that no color changes occur. Do not apply if rain is expected. Does not protect against acid attacks.
PERFORMANCE
INDICATIVE YIELD (1 liter):
Polished technical porcelain stoneware: 30-50 m²
Marble and polished granite: 20-30 m²
Matte natural stone, hydraulic mosaic, etc.: 10-20 m²